PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2015 | 2 | 1 |
Tytuł artykułu

A two dimensions modeling of non-collocated piezoelectric patches bonded on thin structure

Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The system studied in this paper consists of thin structure with several piezoelectric patches bonded on its surface. The patches are used as actuators and sensors. Based on Kirchhoff-Love hypothesis, linear constitutive relations, plane stress formulation and Hamilton principle, we have developed a 2D model for this system using the finite element method. It is not a standard 2D model, since the calculation is performed on a structure that does not have symmetries that allow such easy assumptions. The originality of the work consists in the use of the concept of neutral plane to model this asymmetric system in 2D. This technique, beside good precision, saves computational time. An experimental device has been also built and tested to validate the model. The structural damping is included in the model to match the damping behavior of the real system. Optimizations of the thickness of piezoelectric patches and materials used in the thin structures are also presented in the paper.
Wydawca
Rocznik
Tom
2
Numer
1
Opis fizyczny
Daty
otrzymano
2014-07-15
zaakceptowano
2014-11-14
online
2014-12-18
Twórcy
autor
  • Laboratoire de Génie Electrique de Paris (LGEP) / SPEE-Labs, CNRS UMR 8507; SUPELEC; Université Pierre et Marie Curie P6; Université Paris-Sud 11; 11 rue Joliot Curie, Plateau de Moulon F91192 Gif sur Yvette CEDEX
autor
  • Laboratoire de Génie Electrique de Paris (LGEP) / SPEE-Labs, CNRS UMR 8507; SUPELEC; Université Pierre et Marie Curie P6; Université Paris-Sud 11; 11 rue Joliot Curie, Plateau de Moulon F91192 Gif sur Yvette CEDEX
autor
  • Laboratoire de Génie Electrique de Paris (LGEP) / SPEE-Labs, CNRS UMR 8507; SUPELEC; Université Pierre et Marie Curie P6; Université Paris-Sud 11; 11 rue Joliot Curie, Plateau de Moulon F91192 Gif sur Yvette CEDEX
Bibliografia
  • [1] Hariri H., Bernard Y., Razek A., Finite element model of abeam structure with piezoelectric, patches using RL shunt circuits,AC2011, 14th International Conference on active systemsfor dynamicsmarkets, Darmstadt, Germany, 07-08 September2011,pp.124-131.
  • [2] Yasin M. Y., Ahmad N., Alam M. N., Finite element analysis ofactively controlledsmart platewith patched actuators and sensors,Latin American Journal of Solids and Structures, Vol 7, No3 (2010) 227-247.
  • [3] Sharma A., Kumar R., Vaish R., Chauhan V., Lead-free piezoelectricmaterials’ performance in structural active vibrationcontrol, Journal of IntelligentMaterial Systems and Structures,September 2014 vol. 25 no. 13 1596-1604.
  • [4] Zhang J., He L., Wang E., Active Vibration Control of PiezoelectricIntelligent Structures, Journal of Computers, 03/2010.
  • [5] Rodriguez-Fortun J. M., Orus J., Alfonso J., Gimeno F. B., CastellanosJ. A., Mechatronics, IEEE/ASMETransactions on, Volume:18, Issue: 1 (2013), pp. 221-229.
  • [6] Qu G.M., Li Y.Y., Cheng L., Wang B., Analysis of a piezoelectriccomposite plate with cracks, Journal of composite structures,vol. 72, n∘1 (2006) 111-118.
  • [7] Yan Y.J., YamL.H., Online detection of crack damage in compositeplates using embedded piezoelectric actuators/sensorsand wavelet analysis, Journal of Composite Structures, Vol 58,Issue 1 (2002) 29-38.
  • [8] Jinsong Z., Change G., Likun H., Piezoelectric-based CrackDetection Techniques of Concrete Structures: ExperimentalStudy, Journal of Wuhan University of Technology-Mater. Sci.Ed, 04/2012, Volume 27, Number 2, pp. 346-352.
  • [9] Chomette B., Fernandes A., Sinou J.-J., Cracks Detection UsingActive Modal Damping and Piezoelectric Components, 2013,Vol.:20 iss:4 pg:619-631.
  • [10] Kim S. B., Sohn H., Instantaneous reference-free crack detectionbased on polarization characteristics of piezoelectric materials,2007 Smart Mater. Struct. 16.[WoS]
  • [11] Jeong-Beom I., Fu-Kuo C., Detection and monitoring of hiddenfatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics, Smart Materials andStructures, 06/2004, Volume 13, Number 3, pp. 609-620.
  • [12] Cai J., ChenW., YanW., Lim C., Application of EMI Technique forCrack Detection in Continuous Beams Adhesively Bonded withMultiple Piezoelectric Patches, Mechanics of Advanced Materialsand Structures, 01/2008, Volume 15, Number 1, pp. 1-11.[WoS]
  • [13] Yu Lingyu, Momeni Sepandarmaz, Godinez Valery, GiurgiutiuVictor, Ziehl Paul, Yu Jianguo, Dual Mode Sensing with Low-Profile Piezoelectric Thin Wafer Sensors for Steel Bridge CrackDetection and Diagnosis, Advances in Civil Engineering, 2012,Volume 2012, pp. 1-10.
  • [14] Sunyoto S., Bernard Y., Razek A., Design and realization ofa linear piezoelectric actuator for orthopaedic applications,Journal of Advanced Science, Vol. 18, Issue: 0, 2006, pp. 162-165.
  • [15] Hernandez C., Bernard Y., Razek A., A global assessment ofpiezoelectric actuated micro-pumps, European. Physical JournalApplied Physics, Vol. 51, Issue: 2 (2010) 1-8.[WoS]
  • [16] Bernard Y., Razek A., Piezoelectric valve modeling and design,Darmstadt, Germany, 07-08 September 2011, pp.124-131
  • [17] Hariri H., Bernard Y., Razek A., Locomotion principles for piezoelectricminiature robots, Proceedings on actuator 10, Bremen, DE, 14 June 2010, pp. 1015-1020.
  • [18] Bernard Y., Hernandez C., Razek A., Radial travelingwave ultrasonicmotor design, Actuator14, Breme, DE, 23 June 2014, pp.663-666, Proceedings of Actuator14.
  • [19] Tressler James F., Alkoy Sedat, Newnham Robert E., PiezoelectricSensors and Sensor Materials, Journal of Electroceramics,12/1998, Volume 2, Number 4, pp. 257-272.
  • [20] Zimmermann T., Neuburger M., Benkart P., Hernandez-GuillenF.J., Pietzka C., Kunze M., Daumiller I., Dadgar A., Krost A.,Kohn E., Piezoelectric GaN sensor structures, IEEE Electron DeviceLetters, 2006, Volume 27, Number 5, pp. 309-312.[Crossref]
  • [21] Terada, Jiro, Vibration piezoelectric acceleration sensor, TheJournal of the Acoustical Society of America, 2010, Volume 127,Number 3.
  • [22] Howells Christopher A., Piezoelectric energy harvesting, EnergyConversion and Management, 2009, Volume 50, Number7, pp. 1847-1850.
  • [23] Qingyuan Zhu, Yingtai Li, Yuanqin He, Mingjie Guan, Snapthroughpiezoelectric energy harvesting, Journal of Sound andVibration, 05/2014, Volume 333, Number 18.
  • [24] Qingyuan Zhu, Yingtai Li, Yuanqin He, Mingjie Guan, PiezoelectricEnergy Harvesting in Automobiles, Ferroelectrics, 01/2014,Volume 467, Number 1.[WoS]
  • [25] Hobbs William B., Hu David L., Tree-inspired piezoelectric energyharvesting, Journal of Fluids and Structures, 01/2012, Volume28.
  • [26] Corcolle R., Salaün E., Bouillault F., Bernard Y., Richard C.,Badel A., Guyomar D., Modeling of a beamstructurewith piezoelectricmaterials: introduction to SSD techniques, COMPEL:The International Journal for Computation and Mathematics inElectrical and Electronic Engineering, Vol.27 Issue: 1, (2008)205-214[Crossref]
  • [27] de Abreu G.L.C.M., Ribeiro J.F. and Steffen V., Finite elementmodeling of a plate with localized piezoelectric sensors andactuators, journal of the Braz. Soc. of Mech. Sci. & Eng., Vol.26, No. 2, (April-June) (2004).
  • [28] Jalili N., Piezoelectric-Based Vibration Control, From Macro toMicro-Nano Scale Systems, Springer, 2009.
  • [29] Lin C.C., Huang H.N., Vibration control of beam-plates withbonded piezoelectric sensors and actuators, Journal of computersand structures 73 (1999) 239-248.
  • [30] Nguyen C.H., Pietrzko S.J., FE analysis of a PZT- actuated adaptivebeam with vibration damping using a parallel R-L shuntcircuit, journal of finite elements in analysis and design 42,(2006) 1231-1239.
  • [31] Park C.H., Dynamics modeling of beams with shunted piezoelectricelements, journal of Sound and vibration 268 (2003)115-129.
  • [32] Varadan V. V., Closed loop finite element modeling of active/passive damping in structural vibration control, journal ofsmart materials and structures 5 (1996) 685-694.
  • [33] Chen J.S., Chen S.H., Wu K.C., Analysis of asymmetric piezoelectriccomposite beam, DTIP 2007, Stresa, lago Maggiore,Italy, 25-27 April, 2007.
  • [34] Kayacik O., J.C.B. Jr., Sloss J.M., Adali S., Sadek I. S., Integralequation approach for piezo patch vibration control of beamswith various types of damping, Journal of computers and structures86 (2008) 357-366.
  • [35] Pons L., Rodríguez H., Rocon E., Fernández J.F., Villegas M.,Practical consideration of shear strain correction factor andRayleigh damping in models of piezoelectric transducers, Journalof Sensors and Actuators A 115 (2004) 202-208.
  • [36] Corcolle R., Bouillault F., Bernard Y., Modeling of a plate withpiezoelectric patches: Damping application, IEEE Transactionson Magnetics vol. MAG 44, no.6 (2008) 798-801.
  • [37] Liu G.R., Vibration control simulation of laminated compositeplates with integrated piezoelectric, Journal of sound and vibration,Vol 220, Issue 5 (1999) 827-846.
  • [38] Wang S. Y., Dynamic stability analysis of finite element modelingof piezoelectric composite plates, International Journal ofSolids and Structures, Vol.41, Issue: 3-4 (2003) 745-764.
  • [39] Kusculuoglu Z.K., Royston T., Finite element formulation forcomposite plates with piezoceramic layers for optimal vibrationcontrol applications, Journal of Smart Mater. And Struct.14 (2005) 1139-1153.
  • [40] Kwon Y.W., Bang H., The Finite Element Method UsingMATLAB,Second Edition, CRC Press, 2000.
  • [41] Liu M., Gorman D. G., Formulation of Rayleigh damping and itsextensions, Journal of computers and structures, Vol.57, Issue2, (1995) 277-285.
  • [42] Pons L. , Rodríguez H. , Rocon E., Fernández J. F., Villegas M.,Practical consideration of shear strain correction factor andRayleigh damping in models of piezoelectric transducers, Journalof Sensors and Actuators A 115 (2004) 202-208.
  • [43] Hariri H., Bernard Y., Razek A., Analytical and finite elementmodel for unimorph piezoelectric actuator: Actuator design,Proceedings of Piezo2011, sestriere, 27 February 2011, pp. 71-75
  • [44] Wang Q. M., Cross L. E., Performance analysis of piezoelectriccantilever bending actuators, Journal of Ferroelectrics, Vol. 215(1998) 187-213.
Typ dokumentu
Bibliografia
Identyfikatory
Identyfikator YADDA
bwmeta1.element.doi-10_1515_cls-2015-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.