Pełnotekstowe zasoby PLDML oraz innych baz dziedzinowych są już dostępne w nowej Bibliotece Nauki.
Zapraszamy na https://bibliotekanauki.pl

PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2006 | 16 | 1 | 115-127

Tytuł artykułu

Nonlinear diagnostic filter design: algebraic and geometric points of view

Treść / Zawartość

Warianty tytułu

Języki publikacji

EN

Abstrakty

EN
The problem of diagnostic filter design is studied. Algebraic and geometric approaches to solving this problem are investigated. Some relations between these approaches are established. New definitions of fault detectability and isolability are formulated. On the basis of these definitions, a procedure for diagnostic filter design is given in both algebraic and geometric terms.

Rocznik

Tom

16

Numer

1

Strony

115-127

Opis fizyczny

Daty

wydano
2006
poprawiono
2005-09-29
otrzymano
2005-09-29

Twórcy

  • Institute for Automation and Control Processes, Far Eastern Branch of the Russian Academy of Sciences, Radio Street, 5, Vladivostok, 690041, Russia
  • Institute for Automation and Control Processes, Far Eastern Branch of the Russian Academy of Sciences, Radio Street, 5, Vladivostok, 690041, Russia

Bibliografia

  • Alcorta-Garcia E. and Frank P.M. (1997): Deterministic nonlinear observer-based approach to fault diagnosis: A survey. - Contr. Eng. Pract., Vol. 5, No. 5, pp. 663-670.
  • Birk J. and Zeitz M. (1988): Extended Luenberger observer for nonlinear multivariable systems. - Int. J. Contr., Vol. 47, No. 6, pp. 1823-1836.
  • Chen J. and Patton R.J. (1994): A reexamination of fault detectability and isolability in linear dynamic systems. - Proc. Int. Symp. Safeprocess'94, Espoo, Finland, pp. 590-596.
  • Chow E.Y. and Willsky A.S. (1984): Analytical redundancy and the design of robust failure detection systems. - IEEE Trans. Automat. Contr., Vol. AC-29, No. 7, pp. 603-614.
  • De Persis C. and Isidori A. (2001): A geometric approach to nonlinear fault detection and isolation. - IEEE Trans. Automat. Contr., Vol. AC-46, No. 6, pp. 853-865.
  • Ding X. and Frank P.M. (1990): Nonlinear observer design via an extended canonical form. - Syst. Contr. Lett., Vol. 15, pp. 313-322.
  • Edelmayer A., Bokor J., Szabo Z. and Szigeti F. (2004): Fault reconstruction by means of system inversion: a geometric approach to fault detection and isolation in nonlinear systems. - Int. J. Appl. Math. Comput. Sci., Vol. 14, No. 2, pp. 189-199.
  • Frank P.M. (1990): Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy - A survey and some new results. - Automatica, Vol. 26, No. 3, pp. 459-474.
  • Frank P.M. (1996): Analytical and qualitative model-based fault diagnosis - A survey and some new results. - Europ. J. Contr., Vol. 2, No. 1, pp. 6-28.
  • Frank P.M. and Ding X. (1997): Survey of robust residual generation and evaluation methods in observer-based fault detection systems. - J. Process Contr., Vol. 7, No. 3, pp. 403-424.
  • Gauthier J. and Kupca I. (2000): Deterministic Observation Theory and Application. - Cambridge: Cambridge Univ. Press.
  • Gertler J. and Kunwer M.M. (1993): Optimal residual decoupling for robust fault diagnosis. - Proc. Int. Conf. Tooldiag'93, Toulouse, France, pp. 436-452.
  • Isidori A. (1989): Nonlinear Control Systems. - London: Springer.
  • Hartmanis J. and Stearns R. (1966): Algebraic Structure Theory of Sequential Machines. - New York: Prentice Hall.
  • Join C., Ponsart J-C. and Sauter D. (2002a): Fault detection and isolation via nonlinear filters. - Proc. 15-th IFAC World Congress,Barcelona, Spain, (on CD ROM).
  • Join C., Ponsart J-C. and Sauter D. (2002b): Sufficient conditions to fault isolation in nonlinear systems: a geometric approach. - Proc. 15-th IFACs World Congress, Barcelona, Spain, (on CD ROM).
  • Korn G.A. and Korn T.M. (1961): Mathematical Handbook. - New York: McGraw-Hill.
  • Massoumnia M.A. (1986): A geometric approach to the synthesis of failure detection filters. - IEEE Trans. Automat. Contr., Vol. AC-31, No. 9, pp. 839-846.
  • Massoumnia M.A., Verghese G.C. and Willsky A.S. (1989): Failure detection and identification. - IEEE Trans. Automat. Contr., Vol. AC-34, No. 3, pp. 316-323.
  • Mironovskii L.A. (1980): Functional diagnosis of dynamic systems. - Automat. Remote Contr., Vol. 41, No. 8, pp. 120-128.
  • Misawa E.A. and Hedrick J.K. (1989): Nonlinear observers - A state-of-the-art survey. - J. Dynam. Syst. Meas. Contr., Vol. 111, No. 9, pp. 344-352.
  • Park J., Rizzoni G. and Ribbens W.B. (1994): On the representation of sensor faults in fault detection filters. - Automatica, Vol. 30, No. 11, pp. 1793-1795.
  • Shumsky A.Ye. (1988): Model of the faults for discrete systems and its application to the problem of fault diagnosis. - Electronnoye Modelirovanie, Vol. 10, No. 4, pp. 56-61, (in Russian).
  • Shumsky A.Ye. (1991): Fault isolation in nonlinear systems via functional diagnosis. - Automat. Remote Contr., Vol. 52, No. 12, pp. 148-155.
  • Shumsky A.Ye. and Zhirabok A.N. (2005): Nonlinear diagnostic filter design: algebraic and geometric points of view. - Proc. 16-th IFAC WorldCongress, Prague, Czech Republic, (on CD ROM).
  • Zhirabok A.N. and Shumsky A.Ye. (1987): Functional diagnosis of continuous dynamic systems described by equations whose right-hand side is polynomial. - Automat. Remote Contr., Vol. 48, No. 8, pp. 154-164, (in Russian issue).
  • Zhirabok A.N. and Shumsky A.Ye. (1993a): Controllability, Observability, Decomposition of Nonlinear Dynamic Systems. - Vladivostok: Far State Technical University Press, (in Russian).
  • Zhirabok A.N. and Shumsky A.Ye. (1993b): A new mathematical techniques for nonlinear systems research. - Proc. 12-th IFAC World Congress, Sydney, Australia, Vol. 3, pp. 485-488.
  • Zhirabok A.N. (1997): Fault detection and isolation: Linear and nonlinear systems. - Prep. Int. Symp. Safeprocess'97, Hull, UK, pp. 903-908.

Typ dokumentu

Bibliografia

Identyfikatory

Identyfikator YADDA

bwmeta1.element.bwnjournal-article-amcv16i1p115bwm
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.