Pełnotekstowe zasoby PLDML oraz innych baz dziedzinowych są już dostępne w nowej Bibliotece Nauki.
Zapraszamy na


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2015 | 2 | 1 |

Tytuł artykułu

Stochastic Thermal Post Buckling Response of Elastically Supported Laminated Piezoelectric Composite Plate Using Micromechanical approach

Treść / Zawartość

Warianty tytułu

Języki publikacji



In this paper, second order statistics of thermally induced post buckling response of elastically supported piezoelectric laminated composite plate using micromechanical approach is examined. A Co finite element has been used for deriving eigenvalue problem using higher order shear deformation theory (HSDT) with von-Karman nonlinearity. The uncertain system properties such as material properties of fiber and matrix of composite and piezoelectric, fiber volume fraction, plate thickness, lamination angle and foundation are modeled as random variables. The temperature field considered to be uniform temperature distributions through the plate thickness. A direct iterative based nonlinear finite element method combined with mean-centered second order perturbation technique (SOPT) is used to find the mean and coefficient of variance of the post buckling temperature. The effects of volume fraction, fiber orientation, and length to thickness ratio, aspect ratios, foundation parameters, position and number of piezoelectric layers, amplitude and boundary conditions with random system properties on the critical temperature are analysed. It is found that small amount of variations of uncertain system parameters of the composite plate significantly affect the initial and post buckling temperature of laminated composite plate. The results have been validated with independent Monte Carlo simulation (MCS) and those available in literature.







Opis fizyczny




  • Department of Mechanical
    Engineering, SVNIT Surat-395007, India
  • Department of Mechanical
    Engineering, SVNIT Surat-395007, India
  • Department of Aerospace Engineering, IIT, Kharagpur-
    721302, India


  • [1] Prabhu M.R., Dhanaraj R., Thermal buckling of laminated composite plates, Comp. Struct., 1994, 53, 1193-1204. [Crossref]
  • [2] Chen Lien-wen, Chen Lei-Yi., Thermal buckling behaviour of laminated composite plates with temperature-dependent properties, Compos. Struct., 1989, 13(4), 275–87.
  • [3] Shen H.S., Thermal post buckling behaviour of imperfect shear deformable laminated plates with temperature-dependent properties, Comput. Meth. Appl. Mech. Eng. 2001, 190, 5377–90.
  • [4] Srikanth G., Kumar A. Post buckling response and failure of symmetric laminates under uniform temperature rise, Compos. Struct., 2003, 59, 109–18.
  • [5] Shariyat M., Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layer wise theory, Thin-Walled Struct., 2007, 45(4), 439–52.
  • [6] Pandey R., Shukla K.K., Jain A., Thermoelastic stability analysis of laminated composite plates, an analytical approach, Commun. Nonl. Sci. Numer. Simulat., 2008, 14(4), 1679–99. [Crossref]
  • [7] Shukla K.K., Huang J.H., Nath Y., Thermal post buckling of laminated composite plates with temperature dependent properties, J. Engin.Mech., ASCE, 2004, 130(7), 818-825.
  • [8] Jifeng Xu, Qun Zhao, Pizhong Qiao, A Critical Review on Buckling and Post-Buckling Analysis of Composite Structures, Fron. Aero. Eng., 2013, 2(3), 157-168.
  • [9] Fatima Zohra Kettaf, Mohammed Sid Ahmed Houari, Mohamed Benguediab, Abdelouahed Tounsi, Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model, Steel and Compos. Struct., 2013,15(4), 399-423. [WoS]
  • [10] Grover N., Singh B. N., Maiti D. K., Free vibration and buckling characteristics of laminated composite and sandwich plates implementing a secant function based shear deformation theory, Proceed. Instit. Mech. Eng., Part C: J. Mech. Eng. Sc, 2015, 229(3), 391-405. [WoS]
  • [11] Patel B.P., Ganapati M., Prasad K.R., Makhecha D.P., Dynamic stability of layered anisotropic composite plates resting on elastic foundation, Eng. Struct., 1999, 35, 345-355.
  • [12] Shen H.S., Zheng J.J., Huang X.L., Dynamic response of shear deformable plates under thermomechancial loadings, and resting on elastic foundation. Compos. Struct., 2003,60, 57-66. [Crossref]
  • [13] Setoodes A.R., Karmi G., Static, free vibration and buckling analysis of anisotropic thick laminated composite plates on distributed and point elastic supports using 3-D layer wise FEM, Eng. Struct., 2004, 26, 211-220. [Crossref]
  • [14] Jayachandran S.A., Vaidynathan C.V., Post critical behavior of biaxial compressed plate on elastic foundations, Comput. Struct., 1995,54(2), 239-246. [Crossref]
  • [15] Shen H.S., Williams F.W., Biaxial buckling and post buckling of composite laminated plates on two parameters elastic foundations, Comput. Struct., 1997, 63(6), 1177-1185. [Crossref]
  • [16] Shen H.S., Post buckling of shear deformable laminated plates under biaxial compression and lateral pressure and resting on elastic foundation, Int. J. Mech. Scien., 2000, 42 (6), 1171-1195. [Crossref]
  • [17] Shen H.S., Post buckling analysis of composite plates on two parameters elastic foundation, Int. J. Mech. Scien., 1995, 37 (12), 1307-1316. [Crossref]
  • [18] Xia X.K., Shen H.S., Nonlinear vibration and dynamic response of FGM plates with piezoelectric fiber reinforced composite actuators, Compos. Struct., 2009, 90, 254–262.
  • [19] Shen H.S., A comparison of buckling and post buckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators, Compos. Struct., 2009, 91, 375–384.
  • [20] Shen H., Zheng Hong Zhu, Compressive and thermal post buckling behaviors of laminated plates with piezoelectric fiber reinforced composite actuators, Appli. Math. Model., 2011, 35(4), 1829–1845. [Crossref][WoS]
  • [21] Naveen C., Singh B. N., Thermal buckling and post-buckling of laminated composite plates with sma fibers using layerwise theory. Int. J. Comput.l Meth. Engin. Sci. Mechan, 2009.10 (6), 423-429
  • [22] Panda S. K., Singh B. N., Thermal Post-buckling behaviour of laminated composite cylindrical/hyperboloid shallow shell panel using nonlinear finite element method by Compos. Struct., 2009,91(3), 366-374. [WoS]
  • [23] Chamis C.C., Simplified composite micromechanics equations for mechanical, thermal and moisture related properties. Engin. Guide to comp.mater. ASMInt.,Materials Park, Ohio, 1987, 3.8– 3.24.
  • [24] Chamis C.C., Sinclair J.H., Durability/life of fiber composites in hygrothermomechanical environments. Composite Materials: Testing and Design (Sixth Conf.) STP 787, ASTM, West Conshohocken, Pa., 1982, 498–512.
  • [25] Chandra R., Singh S.P., Gupta K., Micromechanical damping models for fiber-reinforced composites: A comparative study.Composites, 2002, Part A. 33, 787–796. [Crossref]
  • [26] Chao L.P., Shyu S.L., Nonlinear buckling of fiber reinforced composite plates under hygrothermal effects. J. Chinese Inst. Eng. 1996, 19, 657–667.
  • [27] Pandey R., Upadhyay A.K., Shukla K.K., Hygrothermoelastic post buckling response of laminated composite plates, J. Aeros. Engg., ASCE, 2010, 23(1), 1-13.
  • [28] Graham L.L., Siragy E.F., Stochastic finite element for elastic buckling of stiffened panels, ASCE J Eng. Mech., 2001, 127(1), 91-97. [Crossref]
  • [29] Onkar A.K., Upadhyay C.S., Yadav D., Stochastic finite element analysis buckling analysis of laminatedwith circular cutouts under uniaxial compression. Trans ASME J Appl. Mech. 2007, 74, 789–809.
  • [30] Verma V.K., Singh B.N., Thermal buckling of laminated composite plates with random geometric and material properties, Int. J.Struct. Stab. Dynam., 9(2), 2009, 187-211. [WoS][Crossref]
  • [31] Lal A., Singh B. N., Thermal buckling response of laminated composite plate with random system properties, Int. J. Comput. Meth. 2009, 6(2), 447-471. [Crossref][WoS]
  • [32] Lal A., Singh B.N., Kumar R., Effects of random system properties on the thermal buckling analysis of laminated composite plates, Comput. Struct., 2009, 87 (17-18), 1119. [Crossref][WoS]
  • [33] Singh B. N., Jibumon B., Thermal buckling of conical panel/shell embedded with and without piezoelectric layers with random material properties. Int. J. Crashworthiness, 2009, 14(1), 73-81.
  • [34] Kumar R., Patil H.S., Lal A., Hygrothermoelastic buckling response of laminated composite plates with random system properties:macromechanical and micromechanical model, J. Aerosp. Eng., 2012, 10.1061/(ASCE)AS.1943-5525.0000241, 04014123.
  • [35] Reddy J. N., A simple higher-order theory for laminated composite plates, J. Appl. Mech. 1984, 51, 745-752. [Crossref]
  • [36] Kleiber M., Hien T.D., The stochastic finite element method, John Wiley and Sons, 1992.
  • [37] Haldar A.,Mahadevan S., Reliability assessment using stochastic finite element analysis. John Willey and Sons, 2000.
  • [38] Gibson R. F., Principles of composite material mechanics, McGraw-Hill, 1994.
  • [39] Jones R. M., Mechanics of composite materials, McGraw-Hill, New York, 1975.

Typ dokumentu



Identyfikator YADDA

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.